1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 129Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 129

STEPPOWER PACK TEST &
1Prevent accidental starting of engine while testing; twist and remove all spark plug leads
2Remove ignition cover3Twist and remove primary leads from ignition coils[] 4Connect No.1 ignition coil primary lead to Stevens Instrument load adapter NoPL-88 red leadConnect adapter black lead to clean engine groundINotellf Stevens Instrument NoPL-88 is not available, you can make an adapter using 10-ohm, 10-watt resistor, Radio Shack No271-132, or equivalent5Set peak-reading voltmeter to "POS" and "500"
[]] 6Connect meter red lead to adapter red lead and meter black lead to clean engine ground7Crank engine and observe meter:

Back to 1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127