1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 105Get this manual
Timing Sensor Servicing Removal
1Disconnect the timing sensor plug
2Remove the sensor support return spring from its post on the flywheel cover3Remove the two sensor support retainers4lift the sensor support from the flywheel cover
5Remove the two screws securing the timing sensor to the sensor supportInstallation
1Install the timing sensor onto the sensor supportTighten the retaining screws to 10-14 inIbs(1,1-1,6 Nm)
2Apply light coating of ONIC Triple-Guard grease to the sliding surfaces of the sensor supportPosition the sensor support in the flywheel cover3Position the sensor support retainersInstall and tighten the retainer screws