1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 83Get this manual
[!ID 8Remove the intermediate air bleed orifice with OMC Driver, PIN 3170021201 9Remove the float cover plug with large flat blade screwd river10Remove the high speed fuel orifice with OMC Driver, PIN 3170021221 11Remove slow speed mixture needle and spring Inspect the needle for nicks or damage1231 12To remove the fuel manifold from the throttle body, remove the three screws and clamps 22
Inspection 1Inspect carburetor main body and float bowl: Gasket surfaces must be smoothno nicks or irregularities All nozzles and pickup tubes must be securely in place All metal orifice inserts must be securely in place1241 2Thoroughly clean components with OMC Carburetor and Choke Cleaner1Note Do not clean carburetor or its components by submerging in strong carburetor cleaner or hot soaking tankStrong cleaners might damage components or remove sealing compounds