1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 73Get this manual
Inspection f61 1To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms2To test solenoid valve and seat: Lightly pressurize inlet fitting with alcohol and syringe With lever in run position fitting , no fluid
should enter inlet should come out
With lever in prime position both outlet fittingssolenoid cover screws
19l 3To inspect or replace internal components, remove the four
1.JOl 4When assembling solenoid, back out screws in their holes to engage original threadsthen, tighten securelyCOA1138