1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 68Get this manual

1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 68

Assembly
When assembling the fuel piston, always install new washer and stem in addition to other new parts requiredBe sure to lightly tighten stem with fingers; never use pliers[] Lubricate stem with Evinrude or Johnson Outboard Lubricant and slide it into hole in center of intermediate housing

Install new washer on air motor piston screwThen, thread air motor piston onto stem with clockwise rotationPush poppet valve in (toward the stem) to hold the screw in place while turning Tighten 1f4 turn past point of contact

Back to 1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127