1996 Johnson Evinrude "ED" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 507127, Page 60Get this manual
2Remove the vacuum switch hose from the fuel separation chamberConnect vacuum tester to the hoseAvoid accidental starting of engine; twist and remove all spark plug leads&
3Turn key switch to ON position4Slowly draw vacuum on the vacuum switch hoseThe System Check gauge "CHECK ENGINE" light should turn on as the vacuum approaches the switch's preset limitRefer to the chart be low for your engine's limit
GRAY BLACK
Limit (inHg) 112 5.5 12
PCE0063
Color of vacuum switch housing
5If "CHECK ENGINE" light does not turn on, check warning system as described in Section 7, System Check Engine Monitor6If warning system is okay, replace vacuum switchRefer to Fuel Component Bracket Servicing
Oil Supply System
Optional Equipment 1Two different capacity oil tanks are available: OMC PI 176368tank has 1.8 gallon (6,8 litre) capacity OMC PIN 176364 tank has 3.0 gallon (11,4) litre capacityThis tank is intended for dual installations or extended range2Dual engine oil pickup kits allow you to supply oil to two engines from one oil reservoirThe kits include all components to add second oil pickup to your existing reservoir OMC PIN 176366 is compatible with the 3.0 gallon (11,4 litre) reservoir3An oil level gauge and sending unit kit is available to allow continuous monitoring of oil level in the reservoir OMC PIN 175482 is compatible with all reservoirs4A remote oil fill kit is available to allow filling of an inaccessible reservoir through deck mounted fitting OVIC PIN 176461 is compatible with all reservoirs