1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 253Get this manual
Shift Cable AdjustmentTiller Models The shift cable must be adjusted correctly or water pressure from forward boat travel could move the gate into REVERSE, causing the boat to stop abruptlyOccupants could be thrown about or ejected&
1Adjust both cable connectors to allow 18 in(3 mm) of shift cable threads exposedSecure connector with locknut
rn 2Secure shift cable to both upper and lower brackets] 3Secure upper cable connector to shift handle
4Pull up on shift cam until cam roller is at the far end of the FORWARD detent range
[] 5Move shift handle to FORWARD positionPush cable guide onto shift cam stud and secure with washer and locknut
6Move shift handle to NEUTRALThe cam roller should snap into NEUTRAL detent when you pull up on the reverse gate with moderate pressure