1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 248Get this manual
Assembly
1If the reverse gate was removed during disassembly, install reverse gatebushings ,and shafts to jet housingPosition shafts so holes align with holes where retaining screws make contact
2Tighten screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely
rn 3Place any other position.position shownThe roller will not roller into cam in assemble in
4Place cam roller on reverse gate stud, and tighten nut to 5Install bushing
60-84 inIbs(7-9 Nm)
, eccentric
, and cam screw