1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 246Get this manual
1221 26Apply OMC Marine Wheel Bearing Grease to lip of sea lin the seal carrier assemblyPress spacer and seal carrier assembly into bearing housing using finger pressure27Using retaining ring pliers, install snap ring with beveled side of retaining ring facing outwardMake sure the retaining ring is seated in its grooveWear safety glasses and proceed with care to avoid unsnapping the ring from the pliers28After assembly is complete, rotate driveshaft in bearing housingThe assembly should turn freely29Coat three new O-rings with OMC Adhesive sealant and install in grooves in the bearing housing &