1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 162Get this manual
1491 53Install starboard lower engine cover mount bracket and torque screws to 60-84 inIbs(7-9 Nm)
54Install the complete ignition, electrical, and fuel systems
i and ignition wiring is routed and clamped in its original
positionInstallation
"" To prevent possible fire or explosion, make sure all electrical
1Position new powerhead gasketDo not use sealer on the gasket
rv topCoat driveshaft splines with OMChere may preventnot coat 2Moly LubeDo surface of driveshaft as lubricant seating
of driveshaft in crankshaft3Lower the powerhead assembly into placer:;] 4Apply OMC Gasket Sealing Compound to threads of the eight powerhead retaining screwsInstall and torque the screws to 18-20 ftIbs(25-27 Nm)