1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 117Get this manual
Amphenol Connector Servicing
INote The Amphenopin and socket terminals are not the same
Terminal Removal
size as Deutsch pin and socket terminalsYou cannot interchange them
1To remove terminal from the plug or receptacle, lubricate both ends of the cavity with isopropyl alcohol
OJ Pick the proper tool for the service being performed:
ONIC ONIC ONIC ONIC
Pin Remover, PIN 322698 Socket Remover, PIN 322699 Crimping Pliers, PI 322696 Insert Tool, PIN 322697
W [JJ 2Place the plug or receptacle against the edge of flat
surface with clearance behind connector for terminal to be pushed outPush terminal from connector with tool or 3Pin and socket terminals may be replaced if damagedStrip 1f4 in(6 mm) insulation from wire and crimp new terminal onto wire at point with crimping pliersTerminal Installation