1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 56Get this manual
8Route the positive (red) battery cable to starter solenoidSecure cable to starter solenoidCover terminal with rubber boot
9Secure the negative (black) battery cable powerhead ground terminal
10Route the oil tank wires along the same path as the battery cable][] 11Raise grommet to expose slotLeave power tilt and trim motor cable in position in the grommet
12Place the instrument cable into opening
13In the remaining openings, route the battery cable and the oil tank wires 14Lower the grommet into position on the lower engine coverfA