1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 194Get this manual
t o37152 37153
[]] INote Before disassembly, scribe marks on frame and end
caps for reference during reassembly
6Remove the two thru bolts and separate components
Assembly
1Lubricate the armature shaft bearing surface with one drop of SAE No10 oilLubricate pinion helix on armature shaft with OMC Starter Bendix Lube
2If removed, install armature shaft
thrust washer
on drive end of
3Assemble drive end cap to drive end of armature shaft
4Assemble armature to frame and magnet assemblyaligning marks on drive cap end and frame 5Install insulated brush and terminal set in commutator end cap with long lead in slotPosition the insulators and nut as shown in figure