1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 192Get this manual
Solenoid Check
All engine wiring must be disconnected from the solenoid before proceeding with this test
1Calibrate ohmmeter on appropriate scaleConnect one lead to terminal and the other lead to terminal
The ohmmeter should show high reading If the ohmmeter reading is low reading, replace the solenoid
2Attach positive battery jumper to terminal and negative battery jumper to terminal The solenoid should close with an audible click The ohmmeter should show low reading If the ohmmeter reading is high reading, replace the solenoid3After installing the solenoid, coat all wires and terminals, except the battery" +" connection, with CIVIC Black Neoprene Dip
No Load Current Draw, Electric Starter