1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 169Get this manual
InstallationAll Models
[] 1Apply Permatex No2 to both ends of the driveshaft extension tube Install the tube into the recess inside the exhaust housing
2Apply coat of 01IIC Adhesive to the tapered end of the water tube grommet and insert it into the water passage of the exhaust housing
[] 3Coat the outside ends of the water tube extension with 01IIC Triple-Guard greaseInstall the water tube extension into the water tube grommet in the exhaust housing