1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 154Get this manual
4Lightly coat the exterior of the impeller cup with OVIC Gasket Sealing CompoundPosition the impeller cup in the impeller housing as shown
rn 5Lightlyinstallthe impeller cup with oilWith counterclockcoat wise rotation the impeller6Apply thin bead of OVIC Adhesive Mto the machined surface, on the top of the gearcase that contacts the impeller plateSlide the plate down over the driveshaft and position it7Apply OVIC Needle Bearing Assembly Grease to the impeller drive pin and position it on the flat of the driveshaft8Apply thin bead of OVIC Adhesive to the impeller housing mounting surface9Slide the impeller housing into position while rotating the driveshaft to engage the impeller with the drive pin