1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 143Get this manual
Installation
[] 1Apply avJC Triple-Guard Grease to the steering handle sleeve and install it in bracket2Attach steering handle to the bracketTighten the nut just enough so the handle will maintain any position
Replace the handle locknut if it has lost its locking feature
3Use avJC Pin Insert Tool, PIN 322697, to install the stop button black wire into the 3-pin Amphenol plug
[] 4Position the stop ground wire behind the port side of the ignition module and install the screwTorque to 48-96 inIbs(5,4-10,8 Nm)