1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 124Get this manual
5Install OMC Crankshaft Pulley Nut Removerlnstaller, PI 342212, on crankshaft taper aligned with keyway and secure in place with flywheel nutUse crowsfoot wrench to torque nut to 17-18 ftIbs(23-24 Nm)
rn 6Removeand, with toolthe end of the cam.prevent OMC Nut screw from Apply Lock to screw on crankshaft to rotation,
torque to 84-106 inIbs(10-12 Nm)
Valve Lash Adjustment
INote Motor
must be cold to adjust valve lashValve lash adjustment must be made with motor in timed position as described in Timing Procedure, this section