1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 322Get this manual
5 COB2241
1421 24Remove the trim-up relief valve core and spring1431 25Remove the trim-up relief valve seat from the manifold using Snap-on pliers SPR3 or equivalent1441 26Clean and inspect all the components of the trim-up relief valve145 27Remove the three large electric motor retaining screws and washersRemove the electric motor from the manifold461 28There are four types of permanent magnet electric motors on the power trimtilt unitAll motors have an O-ring on the base which neeqs to be inspected upon disassemblyAny of these motors may be used for replacement, but internal components may not be interchangedSet the motor aside until disassembly is required