1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 292Get this manual
1sl 5Remove the reservoir a-ring from the cylinder bodyCheck machined surfaces for nicks and scratchesf71 6Using mm hex wrench, remove the plug from the cylinder bodyInspect the a-ring and the filterReplace, if necessaryf81 7Remove the four Pozidriv screws securing motor to pump manifold assembly Inl 8Remove the wire shield from the pump manifold Remove
the motor and inspect the motor a-ring and the a-ring on the cable connectorf101 9Remove the three Allen-head screws securing the pump manifold assembly to cylinder body10Check machined surface on base for nicks and scratchesIndividual parts in the pump manifold assembly are not available separatelyDo not remove the pump or any control valves from the bodyDo not lose the pump driveshaftr:;:;J 11Remove five a-rings from cylinder bodyCheck machined surfaces for nicks and scratches