1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 217Get this manual
1501 9Align hole in the clutch dog with slot in the propeller shaftInstall the clutch dog on the shaft with grooved end of the clutch dog facing toward forward end of the shaft 1s1l 10Insert the shifter shaft into the propeller shaft, aligning holes in the shifter shaft, propeller shaft, and clutch dogWhen holes are aligned, insert the clutch dog pin into the clutch dog and shifter shaftSecure pin with new retainer springInspect the spring for overlapping or loose coils11 Push the detent lever down into the REVERSE position
1521 12Locate the propeller shaft assembly and align the forward bearing housing with the detent lever toward the topBe
sure the thrust bearing and thrust washer are properly positionedInsert the propeller shaft assembly into the gearcase, being sure to align the shift housing pin with hole in forward end of gearcase housing