1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 216Get this manual
Assembly 1Note Before beginning assembly procedures, all gearcase com-
ponents must be thoroughly cleaned and in serviceable condition Refer to Cleaning and InspectionPage 6-4After the gearcase has been thoroughly cleaned and inspected, install new pinion bearing in the gearcase as follows:
1Assemble the following components of OMC Pinion Bearing Remover and Installer, PIN 391257, as shownPIN 326584 Spacer
14-20 112 inHex Head Screw in0.0Flat Washer
PIN 326582 Rod PIN 326575 Installer 14-20 114 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing on the tool3Insert he tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the spacer
COA3082