1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 195Get this manual
C0A2674
[!J 4Remove the helix halves CD, roller Q), and guides 5Pull the throttle pin out of the cable6Remove the stop switch cover7Remove the tie straps from large braided tube and pull stop switch wires in small braided tube through
G11 8Remove the throttle cable retainer clip CD Pry the throttle
cable trunnion out of the steering handle and remove the cable9Remove the throttle friction control10Remove the warning horn assembly from the handlef131 11Using punch and mallet, drive the steel pin that retains the inner handle from the steering handleINotel Do not remove inner handle except to replace itf14l 12Remove the plastic inner handle from the metal outer handle by driving the outer handle off with mallet and punchInner handle is bonded to outer handle, after removing, chip away remnants