1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 181Get this manual
8Tighten all three screws to following torques: Two side screws15-17 ftIbs(20-23 Nm) Center screw28-33 ftIbs(38-45 Nm)
washersInstall the locknuts on the upper mOl!nt screwsReplace the locknuts if definite resistance to tightening is not felt
L!J screws, lower mount to bracketInstall the screws and lock
10Torque the mount fasteners! Torque the upper mount nuts to 30-32 ftIbs(41-43 Nm) Torque the lower mount screws to 24-26 ftIbs(32-35 Nm)
9Apply OMC Locquic Primer and OMC Nut Lock to the four
i under the steering arm, install the two screwsTighten