1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 165Get this manual
r;Ql 11Install the lower pan support screws and washers on the port and starboard bracketsTorque the screws to 60-84 inIbs(7-9 Nm)'111 12Install the forward lower coverTighten the screws securelyr:J2l 13Install the rear lower coverLoosely install the four front 1131 14Install the two rear screws Tighten all six screws securely15Secure the powerhead ground lead to the powerhead1141 16Align the shift rod and shift leverInstall the shoulder screw and torque to 60-84 inIbs(7-9 Nm)modelsAlign the shift lever and shift rod Pull the shift lever away from the powerhead and install retainer clipThe clip must compress the flat washer and wave washer
i aligned properly and securely installed