1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 124Get this manual
6 DR4772
7Disconnect the 5-pin Amphenol connector between the stator and power packAttach jumper lead to power coil terminals "C" and "0" in the stator end of the connector[] 8Calibrate ohmmeter on appropriate scaleAlternately, attach meter leads between terminals "C", "0", and clean engine ground Meter must show high reading[[] 9Attach meter leads to power coil terminals "C" and "0" If meter shows 400 40 ohms, replace power pack If your test results vary, replace stator
INote Do not run the engine with its power coil
QuikStart Always ON