1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 105Get this manual
Installation
1Install the flywheel key centerline of crankshaft
with its outer edge parallel to
2Clean the crankshaft and flywheel tapers with OMC Cleaning Solvent and let dryThese surfaces must be clean and dry to allow proper locking of the tapers[] 3Align the flywheel keyway and install flywheelCoat the threads of the flywheel nut with OMC Gasket Sealing CompoundInstall the nut and torque to the correct valueSee chart belowFlywheel Nut Torque Chart