1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 278Get this manual
Solenoid Check
All engine wiring must be disconnected from the solenoid before proceeding with this test
Calibrate ohmmeter on appropriate scaleConnect one lead to terminal and other lead to terminal Ohmmeter should show high reading If ohmmeter shows low reading, replace the solenoid
2Attach positive battery jumper to terminal and negative battery jumper to terminal The solenoid should close ith an audible click Ohmmeter should show low reading If ohmmeter shows high reading, replace the solenoid3After installing the solenoid, coat all wires and terminals, except the battery+" connection, with OMC Black Neoprene Dip
No Load Current Draw, Electric Starter