1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 245Get this manual
8 housing27122
rn 12.outerassemble inner and outer its groove in the housing, To seals to bearing install seal retaining ring into bearing
[]] 13Apply OMC Gasket Sealing Compoundto metal casing of seal before installationApply OMC Triple -Guard grease to seal lips before installing inner sealInstall outer seal into bearing housing with lip facing outwardPress seal in until it makes contact with retaining ring
14Install inner seal with lip facing outwardTap seal into bearing housing using socket slightly smaller than the outside diameter of the sealWhen the seal is seated, install the inner retaining ring