1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 242Get this manual
1sl9Remove the adapter to jet housing screwRemove four screws and lock washers through the opening in the housingRemove bearing housing, driveshaft, water pump, and jet housing as an assembly 19l10If servicing the adaptor or exhaust housing, remove screws retaining the adaptor and remove it from the exhaust housingRemove Gate
1Remove cam screweccentric nutand bushings
f1112Remove cam roller nut, and remove cam assembly from reverse gate arm3Move roller to position shown, and remove roller from cam r,:;l4Remove screws retaining reverse gate shaftsWith drift and hammer, lightly tap shafts from housingIf forward stop is to be replaced, remove screwand remove stop and spring5Remove reverse gate from housing, and inspect shaft bushingsReplace if worn or damaged