1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 234Get this manual
Assembly
r::=J Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable condition Refer to Cleaning and Inspection, Page 6-5
1421 Assemble the following components of OMC Pinion Bearing Remover and Installer, PIN 391257, as shown :
14-20 V2 inHex Head Screw PIN 326584 Spacer in0 .0Flat Washer PIN 326582 Rod PIN 326575 Installer 14-20 114 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing onto the tool3Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the spacer"'-'-_ _
1431 4Remove the toolPosition new O-ring CD on the pinion