1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 214Get this manual
2Slide the Collar, PIN 334985 (8), from OMC Driveshaft Shim Kit, PIN 433032, onto the driveshaft with large end touching the bearing housing3Insert the assembled driveshaft into the tool base
1421 143
on the spring-loaded plunger is flush with end of threadsTighten lock ring on preload screw
4Tighten preload screw against the driveshaft until groove
5Rotate the driveshaft several revolutions to seat bearings
144 1451