1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 71Get this manual
Electric Primer
L!J ohms scale and connect between the purplewhite and black
leads Meter should indicate 5.5 1.5 ohms2To test solenoid valve and seat: Lightly pressurize inlet fitting with alcohol and syringe
f411To test the solenoid windings, calibrate an ohmmeter on low
With lever in run positionno fluid should enter inlet fitting With lever in prime positionfluid should come out both outlet fittingsrJl3To inspect or replace internal components, remove the four solenoid cover screws1sl4When assembling solenoid, back out screws in their holes to engage original threadsthen, tighten securelyInstallation