1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 238Get this manual
Installation 1Apply OMC Locquic Primer and OMC Nut Lock to the threads of the two starter mounting screws OJ
2Position the starter and install the mounting screws Tighten to 15-17 ftIbs(20-23 Nm)
3Install top oil reservoir mounting screwTighten screw to 6-9 ftIbs(8-12 Nm)4Attach electrical connector bracket to the engine and secure with screw and ground stud Tighten both to 60-84 inIbs(7-9 Nm)
5Attach ground wire and yellowred wire from neutral start switch to small posts on the bottom of the solenoidTighten nuts securely6Attach red lead to large solenoid postTighten nut securelyW