1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 198Get this manual
9Remove the shift yoke with long-nose pliers
rn 10Remove the shifter lever pivot pinDiscard the pivot pin O-ring
11Remove the propeller shaft and reverse gear components from the gearcase
Shifter detent balls and spring will pop out of the clutch dog when the propeller shaft is removed 12.Using magnetic tool, locate and remove the two shifter detent balls and one detent spring from the gearcase13Use long-nose pliers to remove the clutch dog and shifter lever assemblyUse no forceTilting the shifter lever slightly will allow you to remove it from the gearcaseW