1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 173Get this manual
Installation
1Slide the protective sleeve over the stop button leadsInsert the stop button leads and the throttle cable through the lower engine cover grommet
rn 2Apply OMC Triple-Guard greasesteeringtwo steering handle to the bushingsPlace the bushings into the bracketAttach the
steering handle to the steering bracketTighten the screw so the steering handle can be pivoted and maintain any position
3Secure stop button ground lead to the ground stud Tighten the nut securelyApply OMC Black Neoprene Dip to the stud and nut4Using OMC Insert Tool, PIN 322697, install the stop button lead into the plugConnect the 1-pin Amphenol connector Secure connector in the bracket