1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 172Get this manual
Steering Handle Service Removal
1To avoid accidental starting of engine while servicing, twist and remove all spark plug leads2Remove the throttle cable ball socket from the ball on the throttle arm using CIVIC Ball Socket Remover, PIN 3422263Remove the shoulder screw and spacer securing throttle cable to bracket
4Loosen screw and pivot cover to allow th rottle cable
[] 5Remove two cover screws securing the electrical cover to the engine6Remove screw and J-clamp securing wires to lower engine cover[] 7Separate the 1-pin Amphenol connectorRemove the ground stud nutthen remove the stop button ground lead from the stud8Remove the stop button lead from the Amphenol connector, using CIVIC Socket Removal Tool, PI 3226999Remove protective sleeve from stop button leads and throttle cable10Remove the steering handle screwPull the throttle cable and stop button leads through the grommet in the lower engine cover