1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 131Get this manual
[] 3Unscrew the six lower motor cover screws [[] fA
4Remove the port side lower motor cover enough to cut the tie strap securing the fuel hose to the fuel connectorRemove the fuel hoseUse caution as there might be fuel under pressure in the hoseCatch any fuel in the hose in suitable container5Remove the J-clamp and screw securing the electrical wires to the starboard side lower motor cover
6Remove the two screws securing the electrical connector cover to the engineRemove the cover7Unplug all five electrical connectorsMark their location for installationRemove any ground wires of the engine harness from the ground stud CD8Remove the engine harness and grommet from the lower motor coverRemove the starboard side lower motor cover from the engine