1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 130Get this manual
rn 18Remove powerheadRemovesecuring the manual starter the three screws assembly to the the assembly OJ
17Unplug the low oil light 2-pin Amphenol connector
19Attach lIIC: Lifting Eye, PIN 396748, to the flywheel and tighten the screws only enough to ensure thread engagement
INote Threading the lifting eye screws in too far into the flywheel
will damage components mounted to the underside of the flywheel
20Remove the seven screws the exhaust housing
securing the powerhead to
[] 21 With the weight of the powerhead supported by hoist, pry the powerhead from the exhaust housingRemove the powerheadDiscard the gasket and clean both gasket surfacesRemovalRemote Models
& To avoid accidental starting of engine, twist and remove all