1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 108Get this manual
Packard Connector Servicing Terminal Removal tab on the back side of the terminal engages shoulder in the connector's body to hold the terminal in place
rn 1Pry seal out of connector2Slightly pull on wire to move tab away from shoulder3Insert tool, such as the one shown, into the connector above the terminal to push the tab down
W 4Push the tool and wire out of the connectorTerminal Installation The terminal must be pulled into the connector to lock it in placeBefore installing new terminal on wire, insert the wire through the seal and connector[[] 1The tab on the terminal must extend enough to lock the term inal in place inside the connectorIf the tab isn't extended, use th in tool and bend it outward slightly2Pull terminal into connector3Push seal into connector until seated