1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 44Get this manual
Rigging Information Remote Controls
To prevent accidental starting of engine, verify that battery cables are disconnected at battery
Control Cable Identification
1Put the control handle into NEUTRAL positionThe throttle cable casing guide will retract completely and the shift cable casing guide will go to the midpoint of its travel2As you move the control handle into FORWARD, the shift cable casing guide must retract and the throttle cable casing guide must begin to extend
3As you move the control handle into REVERSE, both casing guides must extend4Identify each control cable for proper installation
& Control
Shift Cable
cable identification and function must be correct before continuing with installation
1Extend shift cable and lubricate with ONIC Triple-Guard grease2Verify that the fast idle lever is down in the RUN position