1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 323Get this manual
66 1651 44Using OMCTrim Cylinder End Cap Remover, PIN 324958,
and breaker bar, remove both ofthe trim cylinder end caps
66 45Remove the outside seals from the trim cylinder end capsThere is an O-ring and back-up ringone of two different designsNewer nylon seals will be continuous ring of nylonOlder seals are split
1671 46Using smooth flat tool, remove the scraper from the
trim end capPry the scraper out of the groove in the end capDiscard the scrapers
68 47Using the same smooth flat tool, remove the O-ring rom
the end capsDiscard the O-ringsClean both end caps and scrape all corrosion or loose paint from the threads in the outside O-ring area
1691 48There are two different types of seals in the trim end capsThe one pictured on the left is an O-ring The one pictured on the right is quad-ring The quad-ring is used for service