1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 296Get this manual
Installation
rv grease totrimtilt unitpin, and install Apply OMC Triple-Guard 1Place into positionthe lower the pini ftIbs(68-73 Nm), then loosen one nut by 18 to 14 turnt=I nng facing out'" 2If loosened, tighten the tilt tube nut to torque of 50-54 3: Instal.1 external snap rings on lower pin with sharp edge of
4Extend tilt cylinder rod to match with holes in swivel bracket5Apply OMC Triple-Guard grease to upper pin, and install the pinr]l 6I.nstall external snap rings onto upper pin with sharp edge faci ng out7Place trimtilt wires in braided tube and install through hole in the stern bracket8Attach the ground wire to the trimtilt unit