1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 227Get this manual
Shift Cable AdjustmentRemote Control Models
i from forward boat travel could move the gate into RE-
'" The shift cable must be adjusted correctly or water pressure
VERSE, causing the boat to stop abruptlyOccupants could be thrown about or ejectedr,Ql 1Pull up on shift cam until cam roller is at the far end of the FORWARD detent range
r,v 2Shift remote control to FORWARD positionTemporarily
push cable guide onto shift cam stud Pull firmly on cable casing to remove free-playAdjust cable trunnion to align with trunnion anchor bracket Pull cable off the stud3Insert cable trunnion in anchor bracket and turn 90 to lock the trunnion in place4Push cable guide onto stud Install washer and hand tighten the locknut
1121 5Shift remote control to NEUTRALThe cam roller should
snap into NEUTRAL detent when you pull up on the reverse gate with moderate pressure