1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 219Get this manual
f81 13To assemble inner and outer seals to bearing housing, install outer seal retaining ring into its groove in the bearing housing
19l 14Apply
OMC Gasket Sealing Compound to metal casing of each seal before installingApply OMC Triple-Guard grease to seal lips before installing inner sealInstall outer seal into bearing housing with lip facing outwardPress seal in until it makes contact with retaining ringbearing housing using socket slightly smaller than the outside diameter of the sealWhen the seal is seated, install the inner retaining ring
1101 f'11l 15Install inner seal with lip facing outwardTap seal into