1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 201Get this manual
r:;-;;l 14Push down on the shift rod to engage REVERSE gear positionUnthread the shift rod from the detent leverRemove the six screws, shift rod, and cover assembly from the gearcaseDiscard the cover gasketRemove and discard the two O-rings from inside the cover 15Remove the propeller shaft assembly from the gearcase'171 16Insert small screwdriver under one end of the clutch dog spring and remove it from the groove by unwrapping it from around the clutch dogDiscard the spring r:j8l 17Push the pin out ofthe clutch dogThe bearing housing assembly will now pull out of the end of the propeller shaft and the clutch dog will slide off the splinesf19l 18Pull the forward gearthrust bearingand thrust washer off the bearing housingr:;;;l 19Push down on the detent lever to make sure it's in the most depressed positionLift out the shift shaft and cradle