1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 150Get this manual
12911301 frame
37Secure restraining jaw
"c" and forcing
38Tighten the rod cap screws to torque of 25-30 inIbs(2-3 Nm)
39Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure:
Position frame onto the connecting rod so the contact area of the jaw is centered in the side of the rod
Tighten forcing screw until jaws contact .connecting rod
Slide frame down until adjustment stop contacts the connecting rod The groove lines on the jaws must be centered on the rodcrankpin diameter