1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 290Get this manual
Installation
1Inspect the starter mountIf the mounts are damaged or worn, replace as follows:
OJ Remove the mount using crescent wrenchW Apply OMC Locquic Primer and OMC Screw Lock to
threads of new mount Tighten mount securely
rn 2Install caps on starter mounts4Position the starter assembly onto the motorInstall the three starter housing retaining screwsThe short screw CD is installed on the port side of the starter housingTighten screws to torque of 48-72 inIbs(5,4-8 Nm)