1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 283Get this manual
Starter Servicing9.915 Removal
i and remove all spark plug leads
'" 1Avoid accidental starting of engine while servicing; twist Loosen starter lockout cam screw several revolutionsRemove the three starter retaining screws3Remove link from lockout camLift starter from powerhead
r,l 233744
Disassembly
I] 1To service lockout assembly, remove the retaining pin'4l 2Remove the plunger, spring, tappet, and cam from the
housing, and the screw from the cam
i manual starters because of rewind spring tension
'" Wear safety glasses while disassembling and assembling
f51 3Pull the starter rope out far enough to tie slipknot in the ropePry the starter rope anchor out of the handleRemove the handle, release the slipknot, and let pulley slowly wind up rope until the rewind spring is completely unwound1sl 4Remove the retaining ring, and lift the pawl and links as an assembly