1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 244Get this manual
L!!J Slide
15Use OMC Bearing Puller PIN 432130 attached to OMC Hammer PIN 432128 to remove the forward bearing cupSecure the puller jaws into grooves behind the cup with jaws facing port and starboardUse OMC Wrench PIN 334359 to hold the puller while tightening the jaws16Use OMC Puller Bridge PIN 432127 and OMC Small 432131 to remove the driveshaft seals from the gearcase
L!J Puller PIN
Inspect bearings in placeIf bearing is removed for any reason, it must be replaced20 17Remove the upper driveshaft bearing and bearing sleeve from the gearcase using the same two toolsDiscard the bearing18To remove the pinion bearings, assemble the following components from OMC Universal Pinion Bearing Remover and Installer PIN 391257:
PIN 326582 Rod
PIN 326577 Remover and Installer
114-20 12 inHex Head Screw